Riferimento: CN550

CN550 Palle Natale leggerissime cm.6/8/10/16

(0)
CN550 Palla Natale cm.6/8/10/16 lavorate a colaggio le palle sono escluse di ganci, che vanno richiesti a parte i ganci consigliati sono: sfera cm.6 - ganci 14mm sfera cm.8 - ganci 14mm sfera cm.10 - ganci 14mm/17mm sfera cm.16 - ganci 17mm
2,30 €
Più
In magazzino
Tutte le migliori vendite

Ci sono 32 prodotti.

Visualizzati 1-32 su 32 articoli

Riferimento: Botz9876

Marca: Botz

Botz9876 Bianco smalto alta temperatura

(0)
Firing range: 1220° – 1280°C white opaque glossy glaze apply 2 – 3 time (rather 3 coats), will not run off, transparently showing through if applied thinly Firing range: 1220 – 1280°C, 30 min soak
8,00 €
Più
In magazzino

Riferimento: Botz9884

Marca: Botz

Botz9884 Marrone chiaro smalto alta temperatura

(0)
Firing range: 1220° – 1280°C glossy, blue-blackish effect glaze, nice running effects can be achieved if applied unevenly apply 2 – 3 coats (rather just 2 coats), slightly tends to run if applied in a thick coat
11,00 €
Più
In magazzino

Marca: Amaco

CR12 Speckled white

(0)
Crawls, una linea di smalti cono 5/6 che darà vita alle superfici ceramiche con motivi unici e spontanei ogni volta. Tradizionalmente considerati un difetto, questi smalti sono realizzati per adattarsi al fenomeno del crawling. Il crawling si verifica quando lo smalto si ritira dalla superficie durante la cottura, creando una finitura strutturata e...
25,80 €
Più
In magazzino

Riferimento: JK S1283a Cristalli bianchi satinato

JK S1283a Cristalli bianchi satinato

(0)
Product information "Glaze S 1283a Kristallweiß, seidenmatt" Mid-fire: 1200 - 1260 °CThis glaze is not acid steady! We give you the advice, not to use this glaze for Eat- and Drinkdishes!
16,50 €
Più
In magazzino

Riferimento: Mayco SW-149

Marca: Mayco

Mayco SW-149 Crackle White

(0)
Mayco Special - Smalto conf. 473ml General Use Use Mayco Stoneware Glazes on any midrange clay body. These glazes are intended for use at cone range 4-6 but are also stable and pleasing at cone 10. Can be used in oxidation, reduction or other alternative atmospheric firing conditions. Always test prior to use
23,00 €
Più
In magazzino

Riferimento: Mayco SW-250

Marca: Mayco

Mayco SW-250 White Opal

(0)
Mayco Classic - Smalto conf. 473ml General Use Use Mayco Stoneware Glazes on any midrange clay body. These glazes are intended for use at cone range 4-6 but are also stable and pleasing at cone 10. Can be used in oxidation, reduction or other alternative atmospheric firing conditions. Always test prior to use
27,20 €
Più
In magazzino

Riferimento: Mayco SW-403

Marca: Mayco

Mayco SW-403 White Mudcrack

(0)
Mayco Texture - Smalto conf. 473ml General Use Use Mayco Stoneware Glazes on any midrange clay body. These glazes are intended for use at cone range 4-6 but are also stable and pleasing at cone 10. Can be used in oxidation, reduction or other alternative atmospheric firing conditions. Always test prior to use
27,20 €
Più
In magazzino

Riferimento: Mayco SW-501 White

Marca: Mayco

Mayco SW-501 White

(0)
Mayco Crystal Glazes - Smalto conf. 473ml General Use Use Mayco Stoneware Glazes on any midrange clay body. These glazes are intended for use at cone range 4-6 but are also stable and pleasing at cone 10. Can be used in oxidation, reduction or other alternative atmospheric firing conditions. Always test prior to use
27,20 €
Più
In magazzino

Marca: Amaco

PC-62 Textured Amber Brown

(0)
La serie di smalti Potter's Choice è stata progettata pensando al ceramista! Questi splendidi smalti aggiungono colori ed effetti fluidi a ceramiche lisce o testurizzate, con risultati ottimali a Cono 5/6. Utilizzare questi smalti significa immergersi nelle diverse tradizioni ceramiche di molte culture nel corso della storia. Effetti di riduzione...
25,80 €
Più
In magazzino

Riferimento: SW-513

Marca: Mayco

SW-513 Brown Gloss

(0)
Mayco Crystal Glazes - Smalto conf. 473ml General Use Use Mayco Stoneware Glazes on any midrange clay body. These glazes are intended for use at cone range 4-6 but are also stable and pleasing at cone 10. Can be used in oxidation, reduction or other alternative atmospheric firing conditions. Always test prior to use
25,20 €
Più
In magazzino

Seguici su Facebook