

Riferimento: INDPB
PIASTRELLA INDUSTRIALE - BISCOTTO BIANCO
Riferimento: TFF1505 25 kg
ARGILLA BIANCA MONTELUPO CLASSICA Durezza: Tornio , ideale per lavorazioni di TORNIO e MODELLAZIONE MANUALE
Riferimento: CN550
CN550 Palla Natale cm.6/8/10/16 lavorate a colaggio le palle sono escluse di ganci, che vanno richiesti a parte i ganci consigliati sono: sfera cm.6 - ganci 14mm sfera cm.8 - ganci 14mm sfera cm.10 - ganci 14mm/17mm sfera cm.16 - ganci 17mm
Yellow matt
Firing range: 1020° - 1060° CAncora nessuna recensione da parte degli utenti.
Riferimento: Botz9319
Notes/Application striking, semi-transparent glaze with a great glassy surface slightly yellowish warm green with natural brown speckles very easy to use in a broad firing range from 1020° to 1280°C (cone 05-04 to cone 8-9) at 1050°C: very colourful and almost opaque / apply 2-3 times at 1150°C: delicately speckled with a rather semi-transparent...
Riferimento: Botz9490
Botz9490 Brown matt Firing range: 1020° - 1060° C
Riferimento: Botz9539
Botz9539 Metallic effect precipitations on gold-yellow ground, increased formation crystals when applied as a thin coat. Tends to form cracks. Darker on red and black clay. range: 1020° - 1060° C
Riferimento: Botz9475
Botz9475 Precious-rustic base glazing, covered with black-green specks Firing range: 1020° - 1060° C
Riferimento: Botz9594
Botz9594 White glossy glaze with large red flow specks. Good results also on coloured clay. Very good melting property and will not tend to run. If possible, do not place large specks in the lower part of vessels and objects. Will produce beautiful effects if irregularly applied in places over single-coloured glossy glazes, e.g., over 9486 Kürbisorange...
Riferimento: Botz9373
Botz9373 Opaque, intense blue-green, glossy. Good results also on coloured clay. Very good melting property and does not tend to run off even at 1100 °C Firing range: 1020° - 1060° C
Riferimento: Botz9102
Glossy transparent Firing range: 1020° - 1060° C Note: only apply 1 time, if possible, use a soft, thick brush. Add a little water. Can be fired at temperatures up to 1100°C, also suitable for Raku, recommended for tableware, ideal as overglaze for one-colour decor.
Pennello americano speciale per stendere smalti in polvere e soprattutto smalti liquidi già pronti, per un ottima stesura senza striature. Ideale anche per argille decantate/sigillate
Riferimento: Botz9509
Botz9509 Deep covering black with bright-blue effects range: 1020° - 1060° C
Riferimento: Botz9603
Botz9603 Warm beautiful red, apply as a thick coat, do not fire above 1040°C. range: 1020° - 1060° C
Riferimento: Botz9569
Botz9569 Very popular transparent blue with black spots for white clay. Most beautiful when applied as a thick coat. Caution: running strongly! The black spots become stripes on vessel walls. Let cool down slowly, otherwise cracks may develop! Blistering with some clays range: 1020° - 1060° C
Riferimento: Botz9606
Botz9606 Orange-red in orange peel surface, tends to white edges, apply as a thick coat, do not set too close, very bright when Raku fired. Stunning effects with uneven overcoating with 9607. range: 1020° - 1060° C
Riferimento: Botz9479
Botz9479 Ideal semi-transparent skin colour tone, cracking is possible, semi-transparent, darker on coloured clay. Recommended for tableware Firing range: 1020° - 1060° C
Yellow matt
Firing range: 1020° - 1060° C