Riferimento: CN550

CN550 Palle Natale leggerissime cm.6/8/10/16

(0)
CN550 Palla Natale cm.6/8/10/16 lavorate a colaggio le palle sono escluse di ganci, che vanno richiesti a parte i ganci consigliati sono: sfera cm.6 - ganci 14mm sfera cm.8 - ganci 14mm sfera cm.10 - ganci 14mm/17mm sfera cm.16 - ganci 17mm
2,30 €
Più
In magazzino
Tutte le migliori vendite
Mayco AC-306 Colla per argilla - Clay Mender
  • Mayco AC-306 Colla per argilla - Clay Mender

Mayco AC306 Colla per argilla - Clay Mender

Mayco AC306 Clay Mender
Mayco

Mayco AC-306 Clay Mender ,

ottimo per attaccare pezzi in argilla e in biscotto, riparare e stuccare articoli danneggiati

Confezione da
6,00 €
Tasse incluse
Quantità
2314 Articoli

Descrizione

AC-306 Clay Mender

Clay Mender is an "enhanced slip" that is intended to be used to repair and/or add attachments to greenware or bisque. More than ordinary slip, the enhanced formula creates a stronger bond for repairs and attachments.  It can be used on bisque to join two pieces together, but is primarily for greenware use.

Available Sizes

  • 2 oz squeeze bottle

 

Application Recommendations

  • Scoring the location where an attachment will be placed will strengthen the bond.  Use a needle tool, toothpick, etc. to score the surface.
  • Apply one light coat of AC-306 to both pieces.
  • Apply a generous coat of AC-306 and immediately and firmly press the pieces together, holding them into place for 10-20 seconds until they become affixed.
  • Let the area dry. After drying, the areas can then be sanded and smoothed to prepare for decoration.
  • A top dressing of an underglaze may be needed. Clay Mender sometimes will show a slightly different color than the clay being used. There are times when the glaze will not readily adhere to the mended area and the top dressing of an underglaze will overcome this problem.

Helpful Hints

  • If there is an area that did not fill in completely with Clay Mender, an additional application may be necessary.
  • For larger cracks/repair areas: thicken Clay Mender with a little clay to create a spackle-like paste.
  • For holes:  thicken Clay Mender as above. Fill in the area slowly and let it dry. Repeat until the area is filled and level with the surrounding areas. A piece of cardboard can be used to support the back of the missing area while you work. 
  • Hairline cracks can be difficult to repair. It helps to widen the crack and then fill this area with the Clay Mender, thus bonding the gap.

Product Label Directions

To repair greenware or bisque. Apply heavy coat of Clay Mender on broken edges. Immediately press firmly together. Fire to shelf cone 04. Do not spray.

Dettagli del prodotto
Mayco
Mayco AC306 Clay Mender
2314 Articoli

Scheda tecnica

Certificazione
Sigillo ACMI AP - atossico (Non-Toxic)
Documenti Allegati
Scarica
Scheda di sicurezza in italiano

Traduzione in italiano della scheda di sicurezza del produttore. Fa fede l'originale in inglese.

Scarica (302.1KB)
Commenti (0)
Valutazione
Ancora nessuna recensione da parte degli utenti.
3 altri prodotti della stessa categoria:

Riferimento: NT-CLR

Mayco NT-CLR Clear One Dipping Glaze

(0)
Cristallina trasparente da immersione, formulata per chi lavora grandi volumi: asciuga rapidamente mantenendo una buona lavorabilita', cosi' da poter rifinire colature e gocciolamenti prima della cottura. In cottura da una finitura trasparente, lucida e liscia. Cottura consigliata al cono 06 (circa 1000 °C): in questo negozio si usa solo a bassa temperatura.
112,00 €
Più
In magazzino

Seguici su Facebook